Abrasive Blast Cabinets591 W. Apollo St. - Brea, California 92821 | 714-257-0484 | FAX: 714-257-0184 | Email: sales@mediablast.com
Sandblasting Corner
automotive blast cabinets header Sandblasting Spacer
Media Blast Automotive Home Blast Cabinet Buying Guide Blast Cabinet Parts Blast Cabinet Technical Library About Media Blast Contact Media Blast and Abrasives, Inc. Sandblasting Spacer

3030 Savage Blast Cabinet (Direct Pressure)

Click on the dictionary icon dfsfds next to various terms for definition.

The 3030 Savage direct pressure machine is manufactured by Media Blast & Abrasives Inc., a leading manufacturer of quality industrial blast cabinets for over 30 years.

The 3030 Savage is designed to meet today’s needs using smaller cfm producing air compressors. Direct pressure machines use a pressure pot assembly to pneumatically push the abrasive media.

The blast nozzle is actually a blasting jet ... keep in mind that an air jet is what creates the compressor air demand. The direct pressure machines push the abrasive through a much smaller hole than the siphon machines. This delivers a very concentrated abrasive pattern typical of all direct pressure systems. Concentrated abrasive creates more frictional heat that at times helps with the removal of heavy coatings. Because the abrasive is being pneumatically pushed, it travels faster at any blasting pressure… about twice as fast as the same blasting pressure in any siphon unit.

What makes the 3030 Savage unique is all the controls have been designed for operation with smaller air volumes. Stainless steel wire mesh scalper screens have been built into the unit to prevent small nozzle clogging. All the hoses are smaller in diameter making operation inside the cabinet easier. The unit is equipped with a 110 square foot cartridge filter that is nearly HEPA quality in filtration, 99.5% with 0.5 micron ... the dust collector is cleaned from the operator’s station by using the manually operated reverse pulse cleaning assembly. The machine also includes a 550 cfm exhaust blower and blower silencer assembly.

The 3030 Savage is not a low cost pressure machine but a properly designed machine for use with smaller compressors and limited floor space.

Ideal for direct pressure applications when only 220 single-phase electricity is available for compressor operation and floor space is at a premium.

INCLUDED STANDARD FEATURES

  • Heavy 14 Gauge Steel Construction, 100% welded
  • 30 Pound Pressure Pot (ASME certified Definition: ASME) with Easy-Load Pot Assembly
  • 100% Continuous Welded Seams Definition: 100% Welded Construction
  • Laminated Safety Glass Window w/ Protector Glass Definition: Protector Glass
  • 8" Diameter Operator Work Ports
  • Stainless Steel Sifting Screen
  • Abrasive Separator Reclaimer Definition: Separator Reclaimer
  • Cartridge Filter Dust Collector, 110 sq. ft. surface area:
    • 550 cfm exhaust blower with silencer
    • Filter efficiency, 99.95% @ 0.5 micron Definition: Micron
    • Manual reverse pulse filter clean, one button
    • Hopper bottom dust collector, dust storage
  • 120-Volt Electrical
  • 1/8” i.d. Tungsten Carbide Definition: Tungsten Carbide Blast Nozzle
  • Quick Change Nozzle and Hoses, no tools required
  • Flexible, Long Wear Blast Hose
  • Blow-off Gun
  • Pneumatic Blast Controls with:
    • Foot pedal blast valve
    • Long wear High Pressure blast shut-off valve
    • Air regulator/gauge/filter
    • Simple to use pot control valves
  • No Spill Door Construction with Lockable Appliance Door Latch
 
3030 Savage - Direct Pressure Blast Cabinet Shown With Side Door Open

Cabinet air changes per minute = VISIBILITY

15-19 cfm recommended

Separator Reclaimer The difference is in the design ... Equipped with 550 cfm exhaust blower and separator reclaimer with 110 sq. ft. filter cartridge that is almost HEPA quality. Also includes the reverse pulse cleaning cycle and dust collector blower silencer.

Other Available Options:

  • Inline Ambient Air Dryer Definition: Ambient Air Dryer
  • Safety Door Interlock Definition: Safety Door Interlock
  • Static Electricity Discharge Kit Definition: Static Discharge Kit

SPECIFICATIONS
3030 Savage
(Direct Pressure Blast Cabinet)

MODEL 3030 Savage; 550 lbs
WORK AREA
DOOR OPENING
30”W x 30”D x 30”H
24" x 25 ”H
OVERALL 35"W x 45"D x 84"H
DUST COLLECTOR 1/2 hp, 550 cfm blower with separator, silencer and 110 sq. ft. filter w/ reverse pulse clean
STANDARD ELECTRICAL 120V/60Hz/1Ph
20 amp service/ 12 amps running
COMPRESSED AIR 10.2 cfm w/ 1/8” nozzle @ 40 psi
Glass bead maximum impact velocity 40 psi

PLACEHOLDER - IMAGE NEEDED

NOTE:
The above features are included on every 3030 Savage blast cabinet. Additional Optional Features listed are available at an additional cost. Any Option listed in Underlined Blue Italic is available as bolt on and can be added to house inventory prior to machine shipment. Other options listed are available but require a custom machine work order and may increase machine delivery time.

When viewing Machine Specifications, Models noted with Underlined Blue Italic are shipped from house inventory.

House Inventory includes Shipping Weight with Model Number – All machines shipped Freight Collect unless prior arrangements have been made.

sandblast spacer
Copyright © 2008-2009 Media Blast and Abrasive, Inc.
Standard Color: Glacier White   Optional Colors: Beige Grabber Blue
sandblasting spacer
sandblasting left sandblasting spacer sandblasting right